After completing this Alaska-approved course, the participant will be able to apply the 100 most important changes from the second half of the 2023 National Electrical Code in common wiring practice.

Course ID(s): 19320

Approved By: Department of Labor and Workforce Development - Reg. of Electrical Administrator

  • 2023 NEC Changes Part 2
    • Chapter 4 [14 Activities]
      • 01. 406.12 Tamper-Resistant Receptacles
      • 02. 408.4(B) Source of Supply.
      • 03. 408.38 Enclosure.
      • 04. 408.43 Panelboard Orientation.
      • 05. 410.10(D) Bathtub and Shower Areas. ??
      • 06. 410. Part XVII. Special Provisions for Germicidal Irradiation Luminaires.
      • 07. 422.16(B) Specific Appliances.
      • 08.422.18 Ceiling-Suspended (Paddle) Fans.
      • View Additional Activities
        • 09. 422.22 Utilizing Separable Attachment Fittings.
        • 10. 424.93 Installation.
        • 11. 430.113 Energy from More than One Source.
        • 12. 440.8. Single Machine and Location
        • 13. 440.11 Disconnecting Means. General.
        • 14. 445.19 Emergency Shutdown of Prime Mover.
    • Chapter 5 [29 Activities]
      • 01. 500.1 Hazardous (Classified) Locations, ??Classes I, II, and III, Divisions 1 and 2. Scope.
      • 02. 500.5(D) Class III Locations.
      • 03. 500.7 Protection Techniques.
      • 04. 500.8(E)(3) Unused Openings.
      • 05. 501.10(A)(2) Class I, Division 1. Flexible Connections
      • 06. 501.30(B) Bonding.
      • 07. 502.30(B)(1), 503.30(B)(1) Bonding.
      • 08. 503.10(A) Class III, Division 1.
      • View Additional Activities
        • 09. 505.8 Protection Techniques.
        • 10. 505.15(C) Zone 2.
        • 11. 505.16(B) Zone 1.
        • 12. Article 512 Cannabis Oil Equipment and Cannabis Oil Systems Using Flammable Materials.??
        • 13. 517.6 Patient Care-Related Electrical Equipment.??
        • 14. 517.10(B). Not Covered.
        • 15. 517.14 Panelboard Bonding
        • 16. 517.20(A) Receptacles and Fixed Equipment.
        • 17. 517.22 Demand Factors.
        • 18. 517.30 Sources of Power.
        • 19. 517.70 Diagnostic Imaging and Treatment Equipment. Applicability.
        • 20. 518.5 Supply.
        • 21. 547.26 Physical Protection.
        • 22. 547.44 Equipotential Planes and Bonding of Equipotential Planes.
        • 23. 550.16(C)(1) Exposed Non-Current-Carrying Metal Parts
        • 24. 550.32. Service Equipment.
        • 25. 550.33(A) Feeder Equipment.
        • 26. 551.40(D). Loss of Ground Device.
        • 27. 555.14 Equipotential Planes and Bonding of Equipotential Planes.
        • 28. 555.15??Replacement of Equipment.
        • 29. 555.36(C) Emergency Electrical Disconnect.
    • Chapter 6 [25 Activities]
      • 01. 620.22 Branch Circuits for Car Lighting, Receptacle(s), Ventilation, Heating and Air-Conditioning.
      • 02. 620.23 Branch Circuits for Machine Room, Control Room/Machinery Space, Control Space, or Truss Interior Lighting and Receptacle(s).
      • 03. 625.40 Electric Vehicle Branch Circuit.
      • 04. 625.42 Rating.
      • 05. 625.43 Disconnecting Means.
      • 06. 625.49 Island Mode.
      • 07. 625.102 Installation.
      • 08. 626.1 Electrified Truck Parking Spaces. Scope.
      • View Additional Activities
        • 09. 630.8 Ground-Fault Circuit-Interrupter Protection for Personnel
        • 10. 646.19 Entrance to and Egress from Working Space.
        • 11. 680.5 Ground-Fault Circuit-Interrupter (GFCI) and Special Purpose Ground-Fault Circuit-Interrupter (SPGFCI) Protection??
        • 12. 680.12 Equipment Rooms, Vaults, and Pits.
        • 13. 680.21(D) Pool Pump Motor Replacement.
        • 14. 680.22(A) Receptacles.
        • 15. 680.26. Equipotential Bonding.
        • 16. 680.32 Ground-Fault Circuit-Interrupter (GFCI) and Special Purpose Ground-Fault Circuit Interrupter (SPGFCI) Protection Overview
        • 17. 680.43 Indoor Installations.
        • 18. 680.54(B),(C) Bonding, Equipotential Bonding of Splash Pads.
        • 19. 680.58 GFCI, SPGFCI Protection for Adjacent Receptacle Outlets.
        • 20. 680.59 GFCI and SPGFCI Protection for Permanently Installed Nonsubmersible Pumps.
        • 21. 680.83 Equipotential Bonding.
        • 22. 690.4(G) PV Equipment Floating on Bodies of Water.
        • 23. 690.12(D) Buildings with Rapid Shutdown.
        • 24. 694.7 Construction and Maintenance.
        • 25. 695.1. Fire Pumps. Scope.??
    • Chapter 7 [19 Activities]
      • 01. 700.3 Tests and Maintenance.
      • 02. 700.4(B) Selective Load Management.
      • 03. 700.11 Wiring, Class-2 Powered Emergency Lighting Systems.??
      • 04. 700.12(C) Supply Duration.
      • 05. 700.12(E) Stored-Energy Power Supply Systems (SEPSS).
      • 06. 701.1. Legally Required Standby Systems. Scope.
      • 07. 701.12(C)(3) Public Gas System, Municipal Water Supply. ??
      • 08. 701.32 Selective Coordination.
      • View Additional Activities
        • 09. 702.7(A) Signs. Standby.
        • 10. 702.12(B). Portable Generators 15kW or Less.
        • 11. 705.10. Identification of Power Sources.
        • 12. 706.7 Commissioning and Maintenance.
        • 13. Article 724 Class 1 Power-Limited Circuits and Class 1 Power-Limited Remote-Control and Signaling Circuits.
        • 14. Article 725, Class 2 and Class 3 Power-Limited Circuits.
        • 15. 725.3(A) Spread of Fire or Products of Combustion.
        • 16. Article 726 Class 4 Fault-Managed Power Systems
        • 17. 750.6. Listing
        • 18. 760.24(A) Mechanical Execution of Work.
        • 19. 760.33 Supply-Side Overvoltage Protection.
    • Chapter 8 [10 Activities]
      • 01. 800.3 Other Articles.
      • 02. 800.100(B)(2) Electrode. In Buildings or Structures with Grounding Means.
      • 03. 800.100(B)(3) Electrode. In Buildings or Structures Without an Intersystem Bonding Termination or Grounding Means.
      • 04. 800.113 Installation of Cables Used for Communication Circuits, Communications Wires, Cable Routing Assemblies, and Communications Raceways.
      • 05. 800.179 Wires and Cables.
      • 06. 810.15 Grounding or Bonding.
      • 07. 830.40(B). Low-Power Circuits.
      • 08. 830.47 Underground Network-Powered Broadband Communications Cables Entering Buildings.
      • 09. 830.133(C) Splicing of Medium-Powered Network-Powered Communications Cables.
      • 10. 830.160 Bends.
    • Chapter 9 and Annexes [3 Activities]
      • 01. Chapter 9, Table 1. Percent of Cross Section of Conduit and Tubing for Conductors and Cables.
      • 02. Annex C, Table C.1 Conduit, Tubing, and Cable Tray Fill Tables for Conductors and Fixture Wires of the Same Size.
      • 03. Annex K, Use of Medical Electrical Equipment in Dwellings and Residential Board-and-Care Occupancies.
  • Course Completion
    • Mandatory Questionnaire
    • Certificate of Completion
Instructor Image

Instructor Bio

Jerry Durham

Jerry previously served the state of North Carolina as a Level III electrical inspector and provided state-approved electrical training for electrical inspectors at both Alamance County and Guilford County (NC) Community Colleges. Jerry taught the Kentucky state-approved four-year electrical apprenticeship programs offered by the Independent Electrical Contractors (IEC) Trade School and Associated Builders and Contractors (ABC) Trade School, and served the state of Kentucky as a Master Electrician and Louisville Metro Code Enforcement Officer. Jerry is a Certified Distance Education Instructor (CDEI) and NCCER Core and Electrical Curriculum certified instructor. Jerry currently holds North Carolina and ICC electrical inspector accreditations and is recognized by the state of Washington as an approved electrical administrator.

Add to Cart