This package is approved for Colorado electricians and satisfies the 24-hour PDU requirement.
The package includes:
- 2026 NEC Changes Part 1
- 2026 NEC Changes Part 2
- Installing Services (2023 NEC)
- Installation Checklists (2023 NEC)
After completing the course, you will be able to:
- Navigate the numerous codes that govern service installation.
- Apply the codes covered in this course to real-world problems in locating, rating, selection, disconnects, multiple services, panels, identification and GFPE.
- Utilize relevant codes on overhead service conductors.
- Select and install appropriate service-entrance conductors.
- Follow best practices regarding service equipment rating.
- Apply best practices to service disconnecting means.
- Incorporate best practices for service overcurrent protection.
- Have a better understanding of what electrical inspectors are looking for on the jobsite
- Be prepared to install electrical systems that will pass the underground, rough, above ceiling, rooftop, service, panelboard, transformer, and final electrical inspections
- Be able to respond to electrical inspector requirements during different phases of a project
Course Format: Text, Video, Audio, & Text
Credit Type: Code Related, Code Change
Approved By: Department of Regulatory Agencies (DORA) - Electrical Board
Colorado NEC Complete Package
- 2026 NEC Changes Part 1
- Chapter 1 [22 Activities]
- 01. 100. Definitions. Scope.
- 02. 100 Definitions. Attachment Fitting, Weight-Supporting (WSAF). & Receptacle, Weight-Supporting Ceiling (WSCR).
- 03. 100 Definitions. Class 4 Circuit, Class 4 Device, Class 4 Power System, Class 4 Receiver, Class 4 Transmitter, Class 4 Utilization Equipment.
- 04. 100 Definitions. Cord Connector.
- 05. 100 Definitions. Counter (Countertop)
- 06. 100 Definitions. Ground Fault Circuit Interrupter, Special Purpose.
- 07. 100. Definitions. Ground-Fault Detector-Interrupter, dc (GFDI)
- 08. 100 Grounding Conductor, Impedance.
- 09. 100 Definitions. Grounded System, Impedance.
- 10. 100 Definitions. Panelboard, Enclosed. ??(Enclosed Panelboard)
- 11. 100 Definitions. Restricted Industrial Establishment.
- 12. 100 Definitions. Stored-Energy Power Supply System (SEPSS).
- 13. 100 Definitions. Work Surface.
- 14. 110.3(A)(8). Examination. Cybersecurity.
- 15. 110.3(B) 110.3(B) Installation and Use.
- 16. 110.16(B) Service Equipment and Feeder Supplied Equipment.
- 17. 110.17. Servicing and Maintenance of Equipment. ??
- 18. 110.20 Reconditioned Equipment. ??
- 19. 110.26 Spaces About Electrical Equipment.
- 20. 110.26(A)(6) Grade, Floor, or Working Platform.
- 21. 110.29 In Sight From (Within Sight From, Within Sight)
- 22. 110.33(A) Entrance to Enclosures and Access to Working Space. Entrance.
- Chapter 2 [53 Activities]
- 01. Article 210, Branch Circuits Not Over 1000 Volts ac, 1500 Volts dc, Nominal.
- 02. 210.2 Reconditioned Equipment
- 03. 210.5(C)(1) Branch Circuits Supplied from More than One Nominal Voltage System.
- 04. 210.8(A)(5) GFCI Protection for Personnel. Dwelling Units. Basements
- 05. 210.8(A)(6) GFCI Protection for Personnel. Dwelling Units. Kitchens ??
- 06. 210.8(A)(7) GFCI Protection for Personnel. Dwelling Units. Areas with Sinks
- 07. 210.8(B). GFCI Protection for Personnel. Other Than Dwelling Units.
- 08. 210.8(B) GFCI Protection for Personnel. Other Than Dwelling Units. Exceptions.
- 09. 210.8(D) GFCI Protection for Personnel. Specific Appliances.
- 10. 210.8(F) GFCI Protection for Personnel. Outdoor Outlets ??
- 11. 210.11(C)(4) Dwelling Units. Garage Branch Circuits.
- 12. 210.12 Arc-Fault Circuit-Interrupter Protection
- 13. 210.17 Guest Rooms and Guest Suites.
- 14. 210.18. Branch-Circuit Ratings. Rating
- 15. 210.23 Permissible Loads, Multiple-Outlet Branch Circuits.
- 16. Table 210.24(1) Summary of Branch-Circuit Requirements - Copper Conductors.
- 17. 210.52(A)(2). General Provisions. Wall Space.
- 18. 210.52(C)(1). Countertops & Work Surfaces. Wall Spaces.
- 19. 210.52(C)(2). Countertops & Work Surfaces. Island and Peninsular Countertops and Work Surfaces.
- 20. 210.52(C)(3) Receptacle Outlet Location.
- 21. 210.52(D) Bathrooms
- 22. 210.70 Lighting Outlets Required.
- 23. 210.70(A)(1) Dwelling Units. Habitable Rooms, Kitchens, Laundry Areas, and Bathrooms. Additional Locations
- 24. 215.15 Barriers.
- 25. 215.18 Surge Protection.
- 26. 220.41 Dwelling Unit(s). Minimum Unit Load.
- 27. 220.42 Lighting Load for Non-Dwelling Occupancies.
- 28. 220.57 Electric Vehicle Supply Equipment (EVSE) Load.
- 29. 220.110 Health Care Facilities. Receptacle Loads.
- 30. 220.120 Marinas. Receptacle Loads.
- 31. Article 225, Outside Branch Circuits and Feeders.
- 32. 225.41 Emergency Disconnects
- 33. 225.42. Surge Protection.
- 34. 230.7 Other Conductors.
- 35. 230.24(A) Clearances. Above Roofs.
- 36. 230.30(B) Wiring Methods.
- 37. 230.62(C) Barriers.
- 38. 230.67. Surge Protection.
- 39. 230.71(B) Two to Six Service Disconnecting Means.
- 40. 230.85 Emergency Disconnects
- 41. Article 235, Branch Circuits, Feeders, and Services Over 1000 Volts ac, 1500 Volts dc, Nominal.
- 42. 240.4(B) Overcurrent Devices Rated 800?Amperes or Less
- 43. 240.6(A) Standard Ampere Ratings for Fuses and Inverse Time Circuit Breakers
- 44. 242.9. Indicating
- 45. Article 245, Overcurrent Protection for Systems Rated Over 1000 Volts ac, 1500 volts dc.
- 46. 250.64(G) Enclosures with Ventilation Openings.
- 47. 250.68(C) Grounding Electrode Conductor Connections.
- 48. 250.118 Types of Equipment Grounding Conductors.
- 49. 250.130 Equipment Grounding Conductor Connections.
- 50. 250.130(C) Replacement of Nongrounding Receptacle or Snap Switch and Branch Circuit Extensions.
- 51. 250.140 Frames of Ranges and Clothes Dryers.
- 52. 250.148 Continuity of Equipment Grounding Conductors and Attachment in Boxes.
- 53. 250.186 Grounding Service-Supplied Alternating-Current Systems.
- Chapter 3 [15 Activities]
- 01. 300.4(E) Cables, Raceways, or Boxes Installed in or Under Metal-Corrugated Roof Decking.
- 02. Table 300.5(A) Minimum Cover Requirements, 0 to 1000 Volts ac, 1500 Volts dc, Nominal.
- 03. Article 305, General Requirements for Wiring Methods and Materials for Systems Rated Over 1000 volts ac, 1500 volts dc, Nominal.
- 04. 310.15(B)(2). Rooftop.
- 05. 312.10 Screws or Other Fasteners.
- 06. 314.27(E) Weight-Supporting Ceiling Receptacles (WSCR) and Weight-Supporting Attachment Fittings (WSAF).
- 07. 314.29(B) Underground.
- 08. 334.10 Uses Permitted.
- 09. 334.15(B) Protection from Physical Damage.
- 10. 334.40(B) Boxes and Fittings. Devices of Insulating Material.
- 11. 344.28 Reaming and Threading.
- 12. 352.10 Uses Permitted.
- 13. 352.44 Expansion Fittings.
- 14. Article 369, Insulated Bus Pipe (IBP)/Tubular Covered Conductors (TCC) Systems.
- 15. Article 371, Flexible Bus Systems.
- Chapter 4, Part 1 [10 Activities]
- 01. 404.1 Switches. Scope.
- 02. 404.2(C) Switches Controlling Lighting Loads.
- 03. 404.14(D) Snap Switch Terminations.
- 04. 404.16 Reconditioned Equipment
- 05. 404.30 Switch Enclosures with Doors.
- 06. 406.3(D) Receptacle Terminations.
- 07. 406.4(G). Protection of Floor Receptacles.
- 08. 406.6(D) Receptacle Faceplate (Cover Plates) with Integral Night Light and/or USB Charger.
- 09. 406.9(A),(B) Damp Locations, Wet Locations.
- 10. 406.9(C) Bathtub and Shower Space.
- Chapter 1 [22 Activities]
- 2026 NEC Changes Part 2
- Chapter 4 [17 Activities]
- 01. 406.40(D) Wiring Devices [Formerly Known as Receptacles, Cord Connectors, and Attachment Plugs (Caps)]. General-Use Snap Switches, Dimmers, and Control Switches. Faceplates or Cover Plates Incorporating Night Lights, USB Chargers, or Both.
- 02. 408.6 Switchboards, Switchgear, and Panelboards. Short-Circuit Current Rating.
- 03. 408.10 Switchboards, Switchgear, and Panelboards—Identification.
- 04. 409.23 Industrial Control Panels. Source(s) of Supply.
- 05. 422.12 Appliance. Central Heating Equipment.
- 06. 424.2 Fixed Electric Space-Heating Equipment. Listing Requirements.
- 07. 424.3 Fixed Electric Space-Heating Equipment. Reconditioned Equipment.
- 08. 426 Fixed Outdoor Electric Deicing and Snow-Melting Equipment. Part VI. Conductive Pavement Heating Systems.
- 09. 430.22(H) Single Motors. Design BE and CE Motors.
- 10. 430.24 Exception No. 4. Several Motors or a Motor(s) and Other Load(s).
- 11. 440.2 Air-Conditioning and Refrigerating Equipment. Listing Requirements.
- 12. 440.4(A) Air-Conditioning and Refrigerating Equipment. Hermetic Refrigerant Motor-Compressor Nameplate.
- 13. 440.14 Air-Conditioning and Refrigerating Equipment. Location.
- 14. 440.15 Air-Conditioning and Refrigerating Equipment. Split-System Indoor Unit Identification.
- 15. 445.13 Generators. Conductors - Minimum Ampacity and Size.
- 16. 480.2 Stationary Batteries. Listing Requirements.
- 17. 480.8 Grounding of Battery Stands and Conductive Cases.
- Chapter 5 [18 Activities]
- 01. 500 Chapter 5 Title Change: Specific Occupancies and Locations.
- 02. 500.5(D)(1) Hazardous (Classified) Locations. Class III Division 1 locations.
- 03. 500.7 Hazardous (Classified) Locations. Protection Techniques.
- 04. 500.30 Bonding in Hazardous (Classified) Locations.
- 05. 501.3 Class I Hazardous (Classified) Locations. Reconditioned Equipment.
- 06. 505.8(Q) Zone 0, 1, and 2 Locations. Protection Techniques. Artificially Ventilated Room "v".
- 07. 511.10(B)(3) Commercial Garages, Repair and Storage. Electric Vehicle Power Transfer System. Connections to Electric Vehicles.
- 08. 512.3 Cannabis Oil Equipment and Cannabis Oil Systems Using Flammable Materials.
- 09. 512.6 Cannabis Oil Equipment and Cannabis Oil Systems Using Flammable Materials. Prohibited Locations.
- 10. 514.11 Motor Fuel Dispensing Facilities. Circuit Disconnects.
- 11. 517.4 Health Care Facilities. Electrical Service.
- 12. 517.20(A)(3) Health Care Facilities. Wet Procedure Locations.
- 13. 517.42 Health Care Facilities. Essential Electrical Systems—Selective Coordination.
- 14. 517.43(A)(7) Health Care Facilities. Automatic Connection to Life Safety branch.
- 15. 551.32 Recreational Vehicles and Recreational Vehicle Parks. Other Sources. Labeling of Inverters.
- 16. 551.40(D) Recreational Vehicles and Recreational Vehicle Parks. Grounding Monitor Interrupter (GMI).
- 17. 555.9 Marinas, Boatyards, Floating buildings, and Docking Facilities. Engineered Design.
- 18. 555.35(F) Marinas, Boatyards, Floating buildings, and Docking Facilities. Coordination and Performance Testing.
- Chapter 6 [32 Activities]
- 01. 600 Chapter 6 Title Change: Specific Equipment.
- 02. 600.6(A)(2) Electric Signs and Outline Lighting. Disconnects. Within Sight of the Sign.
- 03. 604.100(A) Manufactured Wiring Systems. Wiring Methods.
- 04. 610.4 Cranes and Hoists. Special Requirements for Particular Locations.
- 05. 620.21(A)(1) Elevators. Hoistways and Pits.
- 06. 620.21(A)(3) Elevators. Within Machine Rooms, Control Rooms, and Machinery Spaces and Control Spaces.
- 07. 620.22(A)(1) Elevators. Car Light Receptacles, Auxiliary Lighting, and Ventilation. Separate Branch Circuit.
- 08. 620.51(A) Exception No. 3. Elevators, Dumbwaiters, etc. Disconnecting Means.
- 09. 620.51(E) Elevators, Dumbwaiters, etc. Surge Protection.
- 10. 620.62 Elevators, Dumbwaiters, etc. Selective Coordination.
- 11. 624 Electric Self-Propelled Vehicle Power Transfer Systems (ESVSEs).
- 12. 625.4 Electric Vehicle Power Transfer System. Qualified Person.
- 13. 625.5 Electric Vehicle Power Transfer System. Field Markings.
- 14. 625.17(A) Electric Vehicle Power Transfer System. Power-Supply Cord.
- 15. 625.43 Electric Vehicle Power Transfer System. Disconnecting Means.
- 16. 625.44 Electric Vehicle Power Transfer System. Equipment Connection.
- 17. 626.32 Electrified Truck Parking Spaces. Power Supply Cable Assembly.
- 18. 645.27 Information Technology Equipment. Selective Coordination.
- 19. 680.5(B) Swimming Pools, Fountains, and Similar Installations. GFCI and SPGFCI Protection. 150 Volts or Less to Ground.
- 20. 680.12(B) Swimming Pools, Fountains, and Similar Installations. Equipment Rooms, Vaults, and Pits. Receptacles.
- 21. 680.14 Swimming Pools, Fountains, and Similar Installations. Corrosive Environments.
- 22. 680.21(D) Swimming Pools, Fountains, and Similar Installations. Pool Pump Motor Replacement, Reconditioning, or Repair.
- 23. 680.22(D) Swimming Pools, Fountains, and Similar Installations. Lighting, Receptacles, and Equipment. Portable Signs.
- 24. 680.23(B)(2)(b) Swimming Pools, Fountains, and Similar Installations. Underwater Luminaires.
- 25. 680.26(B)(1)&(2) Swimming Pools, Fountains, and Similar Installations. Equipotential Bonding—40% Copper-Clad Steel.
- 26. 680.26(B)(5)(4) Swimming Pools, Fountains, and Similar Installations. Equipotential Bonding—Metal Fittings and Metal Structures.
- 27. 680.30(B) Swimming Pools, Fountains, and Similar Installations. Additional Requirements.
- 28. 690.7(D) Solar Photovoltaic (PV) Systems. Maximum dc Voltage. Marking dc PV Circuits.
- 29. 690.31(B)(1) Solar Photovoltaic (PV) Systems. Conductors of Different Systems.
- 30. 690.43(E) Solar Photovoltaic (PV) Systems. Flexible Equipment Grounding and Bonding Conductors Connected to Moving Parts of PV Arrays.
- 31. 695.7(A)(2) Fire Pumps. Supply Conductors. Feeders.
- 32. 695.14(F) Fire Pumps. Generator Control Wiring Methods.
- Chapter 7 [19 Activities]
- 01. 700 Chapter 7 Title Change: Specific Conditions and Systems.
- 02. 700.1 Emergency Systems. Scope.
- 03. 700.4 Commissioning and Servicing.
- 04. 700.4(F)(8) Emergency Systems. Temporary Source of Power During Servicing (Equal Protection).
- 05. 700.4(F)(9) Emergency Systems. Temporary Source of Power During Servicing (Switching Separately Derived Systems).
- 06. 700.4(F)(10) Emergency Systems. Temporary Source of Power During Servicing - Section 700.10(D)(4)(B).
- 07. 700.6(C) Emergency Systems. Bypass and Isolation of Transfer Equipment.
- 08. 700.10(B) Emergency System. Wiring.
- 09. 700.10(D)(1) Emergency System. Fire Protection. Occupancies.
- 10. 700.10(D)(2) Emergency System. Fire Protection. Feeder-Circuit Wiring.
- 11. 700.11 Emergency System. Wiring, Class 2 and Class 4 Powered Emergency Lighting Systems.
- 12. 700.12(G) Emergency System. Battery-Equipped Emergency Luminaires.
- 13. 700.24 Emergency System. Luminaires with Control Inputs that Provide Emergency Illumination.
- 14. 701.4(C),(D), and (E) Legally Required Standby Systems. Commissioning and Servicing.
- 15. 701.6(C) Legally Required Standby Systems. Bypass and Isolation of Transfer Equipment.
- 16. 701.9 Legally Required Standby Systems. Surge Protection.
- 17. 701.12(C)(3) Legally Required Standby Systems. General Requirements. Outdoor Generator Sets.
- 18. 722 Limited-Energy Cables for Power-Limited Circuits, Fault-Managed-Power Circuits, Optical Fiber Circuits, and Communications Circuits.
- 19. 723 Raceways, Cable Routing Assemblies, and Cable Trays for Limited-Energy Systems.
- Chapter 8 [8 Activities]
- 01. 800.1 General Requirements for Communications Systems Outside and Entering Buildings. Scope.
- 02. 800.2 General Requirements for Communications Systems Outside and Entering Buildings. Listing.
- 03. 800.44 Communications Systems. Overhead (Aerial) Wires and Cables.
- 04. 800.47 Communications Systems. Underground Systems Entering Buildings.
- 05. 800.48 Communications Systems — Unlisted Cables Entering Buildings.
- 06. 810.13 Antenna Systems (Outside). Avoidance of contact with conductors of other systems.
- 07. 830.2 Network-Powered Broadband Communications Systems. Listing Requirements.
- 08. 830.47 Underground Network-Powered Broadband Communications Cables Entering Buildings.
- Chapter 9 and Annexes [6 Activities]
- 01. 9 Tables (Chapter 9) Table 13. Equipment Suitable for Hazardous (Classified) Locations.
- 02. Annex A, Table A.1(1) Informational References. NFPA Standards Referenced in NEC.
- 03. Annex B.8. Medium Voltage Cable Shield Current Correction Factor.
- 04. Annex D, Example D14 Grounded Service Conductor.
- 05. Annex D, Example D15 Load Calculations Using Power Control Systems (PCSs).
- 06. Annex L (New), Proposed Organization of the 2029 National Electrical Code.
- Chapter 4 [17 Activities]
- Installing Services (2023 NEC) [51 Activities]
- 01. Installing Services
- 02. Service Basics - 230.1 Scope
- 03. Service Basics - Article 100 Definitions: Service
- 04. Overhead Service Conductors - Article 100 Definitions: Overhead Service & Service-Entrance Conductors
- 05. Overhead Service Conductors - 230.2 Number of Services
- 06. Overhead Service Conductors - 230.24(A) Clearances Above Roofs
- 07. Overhead Service Conductors - 230.24(A) Clearances Above Roofs Exception No. 1
- 08. Overhead Service Conductors - 230.24(A) Clearances Above Roofs Exceptions 2 and 3
- 09. Overhead Service Conductors - 230.24(B) Vertical Clearance for Overhead Service Conductors
- 10. Overhead Service Conductors - 230.28 Service Masts as Supports
- 11. Underground Service Conductors - Article 100 Definitions: Underground Service & Service-Entrance Conductors
- 12. Underground Service Conductors - 230.32 Protection Against Damage
- 13. Service-Entrance Conductors - 230.40 Number of Service-Entrance Conductor Sets
- 14. Service-Entrance Conductors - 230.42 Minimum Size and Ampacity
- 15. Service-Entrance Conductors - 310.12 Single-Phase Dwelling Services and Feeders
- 16. Service-Entrance Conductors - 230.43 Wiring Methods for 1000 Volts, Nominal, or Less
- 17. Service-Entrance Conductors - 230.46 Spliced and Tapped Conductors
- 18. Service-Entrance Conductors - 230.50 Protection Against Physical Damage
- 19. Service-Entrance Conductors - 230.54(C) Service Heads and Goosenecks Above Service-Drop or Overhead Service Attachment
- 20. Service Equipment - Article 100 Definitions Service Equipment
- 21. Service Equipment - 230.66 Service Rated Equipment
- 22. Service Equipment; Disconnecting Means - 230.70(A) Location
- 23. Service Equipment; Disconnecting Means - 230.70(B)&(C) Marking; Suitable for Use
- 24. Service Equipment; Disconnecting Means - 230.71 Maximum Number of Disconnects
- 25. Service Equipment; Disconnecting Means - 230.72 Grouping of Disconnects
- 26. Service Equipment; Disconnecting Means - 230.79 Rating of Service Disconnecting Means
- 27. Service Equipment; Disconnecting Means - 230.80 Combined Rating of Disconnects
- 28. Service Equipment; Disconnecting Means - 230.82 Equipment Connected to the Supply Side of Service Disconnect
- 29. Service Equipment; Overcurrent Protection - 230.90 Where Required
- 30. Service Equipment; Overcurrent Protection - 230.91 Location
- 31. Service Equipment; Overcurrent Protection - 230.95 Ground-Fault Protection of Equipment
- 32. Strip Shopping Center - Practical Problem #1: Location of the 277/480-Volt Service
- 33. Strip Shopping Center Practical Problem #2: Location of the 120/208 Volt Service
- 34. Strip Shopping Center Practical Problem #3: The Rating of the 277/480-Volt Service
- 35. Strip Shopping Center Practical Problem #4: The Rating of the 120/208-Volt Service
- 36. Strip Shopping Center Practical Problem #5: Ungrounded Conductors to Tenant Spaces A, B, D, E and G
- 37. Strip Shopping Center Practical Problem #6: Grounded Conductor to Tenant Spaces A, B, D, E and G
- 38. Strip Shopping Center Practical Problem #7: Ungrounded Conductors to Tenant Space C (Sandwich Shop)
- 39. Strip Shopping Center Practical Problem #8: Grounded Conductor to Tenant Space C (Sandwich Shop)
- 40. Strip Shopping Center Practical Problem #9: Ungrounded Conductor to Tenant Space H (Print Shop)
- 41. Strip Shopping Center Practical Problem #10: Grounded Conductor to Tenant Space H (Print Shop)
- 42. Strip Shopping Center Practical Problem #11: Ungrounded Conductor to Tenant Space F (Restaurant)
- 43. Strip Shopping Center Practical Problem #12: Grounded Conductors in Parallel
- 44. Strip Shopping Center Practical Problem #13: Location of the 120/208-Volt Service
- 45. Strip Shopping Center Practical Problem #14: Conduit Installation to Tenant Spaces
- 46. Strip Shopping Center Practical Problem #15: Location of Service Disconnects
- 47. Strip Shopping Center Practical Problem #16: Two Services
- 48. Strip Shopping Center Practical Problem #17: House Load Panel
- 49. Strip Shopping Center Practical Problem #18: Identifying Service Location
- 50. Strip Shopping Center Practical Problem #19: Service Requirements in the NEC
- 51. Strip Shopping Center Practical Problem #20: Ground-Fault Protection
- Installation Checklists (2023 NEC) [50 Activities]
- 01. Underground -300.5(F) Backfill
- 02. Underground - 300.5(H) Bushings
- 03. Underground - 300.5(J) Earth Movement
- 04. Underground - Table 300.5(A) Minimum Cover Distance
- 05. Underground - 300.5(G) Raceway Seals
- 06. Underground - 314.27(B) Floor Boxes
- 07. Underground - 250.52(A)(3) Concrete-Encased Electrode
- 08. Rough Inspection - Rough Inspection Basics
- 09. Rough Inspection - 517.13(A) Branch Circuits Serving Patient Care Areas
- 10. Rough Inspection - 110.12(A) Unused Openings
- 11. Rough Inspection - 330.30 MC Cable; Securing and Supporting
- 12. Rough Inspection - 342.14, 344.14, and 358.14 Dissimilar Metals
- 13. Rough Inspection - Article 100 Definitions: Accessible
- 14. Rough Inspection - 300.4(A)(1) Cables and Raceways Through Wood Members; Bored Holes
- 15. Above the Ceiling - 300.11(A)&(B) Secured In Place
- 16. Above the Ceiling - 200.4(B) Multiple Circuits
- 17. Above the Ceiling - 424.66/110.26(A)(4) Duct Heaters with Limited Access Above Ceiling/Working Space; Limited Access
- 18. Above the Ceiling - 410.110(A) Special Provisions for Flush and Recessed Luminaires; Clearance from Combustible Material
- 19. Above the Ceiling - 590.3(D) Removal of Temporary Wiring
- 20. Above the Ceiling - 300.22(C) Other Spaces Used for Environmental Air
- 21. Above the Ceiling - 250.104(A)(B)(C) Bonding of Piping and Exposed Structural Steel
- 22. Above the Ceiling - 410.117(C) Luminaires; Tap Conductors
- 23. Above the Ceiling - 300.21 Spread of Fire or Products of Combustion
- 24. Rooftop - 250.110 Equipment Fastened in Place or Connected by Permanent Wiring Methods
- 25. Rooftop - 250.12 Clean Surfaces
- 26. Rooftop - 110.22(A) Identification of Disconnecting Means
- 27. Rooftop - 250.97 Bonding for Over 250 Volts
- 28. Rooftop - 440.4(B) Marking on HVAC Equipment
- 29. Rooftop - 314.23(E)&(F) Raceway Supported Enclosures
- 30. Rooftop - 210.63(A) Heating, Air-Conditioning, and Refrigeration Equipment Outlet
- 31. Service, Panelboards, Transformers - 110.24 Available Fault Current
- 32. Service, Panelboards, Transformers - 200.6 Identification of Grounded Conductors
- 33. Service, Panelboards, Transformers - 250.119 Identification of Equipment Grounding Conductors
- 34. Service, Panelboards, Transformers - 210.5(C)(1) & 235.5(C)(1) Identification of Ungrounded Conductors
- 35. Service, Panelboards, Transformers - 110.26(A)(1) Working Space
- 36. Service, Panelboards, Transformers - 408.5 Clearance for Conductor Entering Bus Enclosures
- 37. Service, Panelboards, Transformers - 250.30(A)(1) System Bonding Jumpers
- 38. Service, Panelboards, Transformers - 250.30(A)(4&5) Grounding Electrode and Grounding Electrode Conductor, Single Separately DerivedSystem
- 39. Final Inspection - 450.10(A) Grounding of Dry-Type Transformer Enclosures
- 40. Final Inspection - 700.12 General Requirements
- 41. Final Inspection - 700.16 Emergency Illumination, Part 1
- 42. Final Inspection - 700.16 Emergency Illumination, Part 2
- 43. Final Inspection - 110.3(B) Installation and Use
- 44. Final Inspection - 427.22 Pipelines and Vessels; Ground-Fault Protection of Equipment
- 45. Final Inspection - Final Equipment Installation
- 46. Final Inspection - 700.12(H)(2)(3) Battery-Equipped Emergency Luminaires
- 47. Final Inspection - 700.11 Identification of Emergency Lighting Circuits
- 48. Final Inspection - 210.8 GFCI Protection for Personnel
- 49. Final Inspection - 110.25 Lockable Disconnecting Means
- 50. Final Inspection - 408.4(A) Circuit Directory
Course Completion
- 2026 NEC Changes Part 1 - Certificate of Completion
- 2026 NEC Changes Part 2 - Certificate of Completion
- Installing Services (2023 NEC) - Certificate of Completion
- Installation Checklists (2023 NEC) - Certificate of Completion
