This one-hour course provides a preliminary overview of the 2024 National Fire Protection Association (NFPA) 70E Standard for Electrical Safety in the Workplace and counts as Workplace Safety (WPS) hours.

The NFPA created the 70E Standard to fulfill Occupational Safety and Health Administration (OSHA) safety regulations for working around electricity. The NFPA 70E is not an OSHA publication, but it fulfills applicable OSHA requirements.

The 2024 NFPA 70E and this course are also consistent with NFPA requirements from the 2023 NFPA 70 National Electrical Code. All lesson material is approved by the Florida Department of Business and Professional Regulation.

After finishing this course, licensees will be able to:

  • Describe the purpose, scope, and arrangement of the 2024 NFPA 70E.
  • Understand how the 2024 NFPA 70E Standard applies to general electrical installations, electrical maintenance, and work on special electrical equipment.
  • Explain the difference between mandatory rules, permissive rules, and explanatory materials in 70E.
  • Describe terms and definitions specific to the NFPA 70 Standard.
  • Understand the need and process for establishing electrically safe work conditions around equipment.
  • Be familiar with an electrical safety program (ESP)
  • Understand host employer and contract employer responsibilities for maintaining electrical safety on the job site.
  • Execute safe handling, storage, and grounding of portable electrical tools.

Course ID(s): 0802938

Approved By: Electrical Contractor's Licensing Board (ECLB)

  • Electrical Safety (NFPA 70E 2024): Part 1
    • Electrical Safety (NFPA 70E 2024) [10 Activities]
      • 01. Article 90: Sections 90.1, 90.2, 90.3
      • 02. Article 90: Sections 90.4, 90.5, 90.6
      • 03. Article 100 Definitions
      • 04. Article 105, Application of Safety-Related Work Practices and Procedures
      • 05. Article 110, General Requirements for Electrical Safety-Related Work Practices
      • 06. Section 110.3, Electrical Safety Program.
      • 07. Section 110.4, Training Requirements.
      • 08. Section 110.5 Host and Contract Employers Responsibilities.
      • 09. Section 110.6, Test Instruments and Equipment.
      • 10. Section 110.7(A)&(B), Portable Cord- and-Plug-Connected Electric Equipment.
  • Course Completion
    • End of Course Affirmation
    • Mandatory Questionnaire
    • Certificate of Completion
    • Expedited Reporting Available
Instructor Image

Instructor Bio

Jerry Durham

Jerry previously served the state of North Carolina as a Level III electrical inspector and provided state-approved electrical training for electrical inspectors at both Alamance County and Guilford County (NC) Community Colleges. Jerry taught the Kentucky state-approved four-year electrical apprenticeship programs offered by the Independent Electrical Contractors (IEC) Trade School and Associated Builders and Contractors (ABC) Trade School, and served the state of Kentucky as a Master Electrician and Louisville Metro Code Enforcement Officer. Jerry is a Certified Distance Education Instructor (CDEI) and NCCER Core and Electrical Curriculum certified instructor. Jerry currently holds North Carolina and ICC electrical inspector accreditations and is recognized by the state of Washington as an approved electrical administrator.

Add to Cart