GA 2023 NEC Changes Part 2

4 Hour Course

$49.00

Course Description
Course Outline

After completing the 2023 NEC Changes for Georgia, the participant will be able to apply the most important changes to the 2023 National Electrical Code in common wiring practice.

Learning Objectives:

Identify updates, additions, and changes to Chapter 2 of the 2023 National Electrical Code.
Identify the new requirements for grounding and bonding in Chapter 2 of the 2023 NEC.
Identify updates, additions, and changes to Chapter 3 of the 2023 National Electrical Code.
Summarize the general requirements for wiring methods and materials for systems rated over 1000 volts ac, 1500 volts dc covered in Article 305
Identify updates, additions, and changes to Chapter 4 of the 2023 National Electrical Code.
Describe the change in scope to Chapter 4 of the 2023 NEC.
Identify changes and additions to requirements for switches found in Chapter 4 of the 2023 NEC.

Approved By: State Construction Industry Licensing Board

Add to Cart (877) 724-6150

2023 NEC Changes Part 2
- Chapter 2 [25 Activities]
  - 01. 220.110 Health Care Facilities. Receptacle Loads.
  - 02. 220.120 Marinas. Receptacle Loads.
  - 03. Article 225, Outside Branch Circuits and Feeders.
  - 04. 225.41 Emergency Disconnects
  - 05. 225.42. Surge Protection.
  - 06. 230.7 Other Conductors.
  - 07. 230.24(A) Clearances. Above Roofs.
  - 08. 230.30(B) Wiring Methods.
  - View Additional Activities
    - 09. 230.62(C) Barriers.
    - 10. 230.67. Surge Protection.
    - 11. 230.71(B) Two to Six Service Disconnecting Means.
    - 12. 230.85 Emergency Disconnects
    - 13. Article 235, Branch Circuits, Feeders, and Services Over 1000 Volts ac, 1500 Volts dc, Nominal.
    - 14. 240.4(B) Overcurrent Devices Rated 800?Amperes or Less
    - 15. 240.6(A) Standard Ampere Ratings for Fuses and Inverse Time Circuit Breakers
    - 16. 242.9. Indicating
    - 17. Article 245, Overcurrent Protection for Systems Rated Over 1000 Volts ac, 1500 volts dc.
    - 18. 250.64(G) Enclosures with Ventilation Openings.
    - 19. 250.68(C) Grounding Electrode Conductor Connections.
    - 20. 250.118 Types of Equipment Grounding Conductors.
    - 21. 250.130 Equipment Grounding Conductor Connections.
    - 22. 250.130(C) Replacement of Nongrounding Receptacle or Snap Switch and Branch Circuit Extensions.
    - 23. 250.140 Frames of Ranges and Clothes Dryers.
    - 24. 250.148 Continuity of Equipment Grounding Conductors and Attachment in Boxes.
    - 25. 250.186 Grounding Service-Supplied Alternating-Current Systems.
- Chapter 3 [15 Activities]
  - 01. 300.4(E) Cables, Raceways, or Boxes Installed in or Under Metal-Corrugated Roof Decking.
  - 02. Table 300.5(A) Minimum Cover Requirements, 0 to 1000 Volts ac, 1500 Volts dc, Nominal.
  - 03. Article 305, General Requirements for Wiring Methods and Materials for Systems Rated Over 1000 volts ac, 1500 volts dc, Nominal.
  - 04. 310.15(B)(2). Rooftop.
  - 05. 312.10 Screws or Other Fasteners.
  - 06. 314.27(E) Weight-Supporting Ceiling Receptacles (WSCR) and Weight-Supporting Attachment Fittings (WSAF).
  - 07. 314.29(B) Underground.
  - 08. 334.10 Uses Permitted.
  - View Additional Activities
    - 09. 334.15(B) Protection from Physical Damage.
    - 10. 334.40(B) Boxes and Fittings. Devices of Insulating Material.
    - 11. 344.28 Reaming and Threading.
    - 12. 352.10 Uses Permitted.
    - 13. 352.44 Expansion Fittings.
    - 14. Article 369, Insulated Bus Pipe (IBP)/Tubular Covered Conductors (TCC) Systems.
    - 15. Article 371, Flexible Bus Systems.
- Chapter 4 [10 Activities]
  - 01. 404.1 Switches. Scope.
  - 02. 404.2(C) Switches Controlling Lighting Loads.
  - 03. 404.14(D) Snap Switch Terminations.
  - 04. 404.16 Reconditioned Equipment
  - 05. 404.30 Switch Enclosures with Doors.
  - 06. 406.3(D) Receptacle Terminations.
  - 07. 406.4(G). Protection of Floor Receptacles.
  - 08. 406.6(D) Receptacle Faceplate (Cover Plates) with Integral Night Light and/or USB Charger.
  - 09. 406.9(A),(B) Damp Locations, Wet Locations.
  - 10. 406.9(C) Bathtub and Shower Space.
Course Completion
- Mandatory Questionnaire
- Certificate of Completion

Instructor Bio

Jerry previously served the state of North Carolina as a Level III electrical inspector and provided state-approved electrical training for electrical inspectors at both Alamance County and Guilford County (NC) Community Colleges. Jerry taught the Kentucky state-approved four-year electrical apprenticeship programs offered by the Independent Electrical Contractors (IEC) Trade School and Associated Builders and Contractors (ABC) Trade School, and served the state of Kentucky as a Master Electrician and Louisville Metro Code Enforcement Officer. Jerry is a Certified Distance Education Instructor (CDEI) and NCCER Core and Electrical Curriculum certified instructor. Jerry currently holds North Carolina and ICC electrical inspector accreditations and is recognized by the state of Washington as an approved electrical administrator.

Add to Cart

GA 2023 NEC Changes Part 2

Course Description

Course Outline

Instructor Bio