NE 2023 NEC Changes

12 Hour Course
4.5 153 Reviews
$99.00

Course Description
Course Outline

After completing this NEC Changes course, Nebraska electricians will be able to apply the 150 most important changes to the 2023 National Electrical Code in common wiring practice.

Learning Objectives:

Describe the overall layout of the National Electrical Code and the addition of new articles.
Identify the scope of what is covered and not covered in the Code.
Identify updates, additions, and changes to Chapter 1 of the 2023 National Electrical Code.
Identify updates, additions, and changes to Chapter 2 of the 2023 National Electrical Code.
Describe changes for branch circuits found in Chapter 2 of the 2023 NEC.
Identify updates, additions, and changes to Chapter 3 of the 2023 National Electrical Code.
Summarize the general requirements for wiring methods and materials for systems rated over 1000 volts ac, 1500 volts dc covered in Article 305.
Outline new requirements for insulated bus pipe and flexible bus systems found in Chapter 3 of the 2023 NEC.
Identify updates, additions, and changes to Chapter 4 of the 2023 National Electrical Code.
Describe the change in scope to Chapter 4 of the 2023 NEC.
Identify changes and additions to requirements for switches found in Chapter 4 of the 2023 NEC.
Outline new requirements for receptacles, cord connectors, and attachment plugs found in Chapter 4 of the 2023 NEC.
Describe changes and additions to appliance requirements found in Chapter 4 of the 2023 NEC.
Identify updates, additions, and changes to Chapter 5 of the 2023 National Electrical Code.
Describe the changes to Class III Division 1 and Division. 2 locations found in Chapter 5 of the 2023 NEC.
Outline new requirements for protection of electrical and electronic equipment in hazardous locations.
Explain the new requirements for cannabis oil equipment and cannabis oil systems using flammable materials found in Chapter 5 of the 2023 NEC.
Identify changes in requirements for electrical construction and installation criteria in health care facilities.
Identify updates, additions, and changes to Chapter 6 of the 2023 National Electrical Code.
Outline new and changed requirements for electric vehicle power transfer systems found in Chapter 6 of the 2023 NEC.
Explain the new and changed requirements for construction and installation of electrical wiring for swimming pools, fountains, and similar installations.
Identify updates, additions, and changes to Chapter 7 of the 2023 National Electrical Code.
Outline new and changed requirements for emergency systems in Chapter 7 of the 2023 NEC.
Define the changes in scope for Article 701: Legally Required Standby Systems.
Identify changed requirements concerning signage and portable generators for optional standby systems found in Chapter 7 of the 2023 NEC.
Describe new wiring requirements for Class 4 fault-managed power systems.
Identify changed requirements for installation of circuits and supply-side overvoltage protection in fire alarm systems.
Identify updates, additions, and changes to Chapter 8 of the 2023 National Electrical Code.
Outline new and changed requirements for conduits Annex C of the 2023 NEC.

Course ID(s): 24-188-082824
Approved By: Nebraska State Electrical Board

Add to Cart (877) 724-6150

2023 NEC Changes
- Checkpoint 1
- Chapter 1 [17 Activities]
  - 01. 100. Definitions. Scope.
  - 02. 100 Definitions. Attachment Fitting, Weight-Supporting (WSAF). & Receptacle, Weight-Supporting Ceiling (WSCR).
  - 03. 100 Definitions. Class 4 Circuit, Class 4 Device, Class 4 Power System, Class 4 Receiver, Class 4 Transmitter, Class 4 Utilization Equipment.
  - 04. 100 Definitions. Counter (Countertop)
  - 05. 100 Definitions. Ground Fault Circuit Interrupter, Special Purpose.
  - 06. 100. Definitions.?Ground-Fault Detector-Interrupter, dc (GFDI)?
  - 07. 100 Definitions. Panelboard, Enclosed. (Enclosed Panelboard)
  - 08. 100 Definitions. Restricted Industrial Establishment.
  - View Additional Activities
    - 09. 100 Definitions. Stored-Energy Power Supply System (SEPSS).
    - 10. 100 Definitions. Work Surface.
    - 11. 110.3(A)(8). Examination. Cybersecurity.
    - 12. 110.3(B) 110.3(B) Installation and Use.
    - 13. 110.16(B) Service Equipment and Feeder Supplied Equipment.
    - 14. 110.17. Servicing and Maintenance of Equipment.
    - 15. 110.20 Reconditioned Equipment.
    - 16. 110.26 Spaces About Electrical Equipment.
    - 17. 110.26(A)(6) Grade, Floor, or Working Platform.
- Checkpoint 2
- Chapter 2 [31 Activities]
  - 01. 210.2 Reconditioned Equipment
  - 02. 210.8(A)(5) GFCI Protection for Personnel. Dwelling Units. Basements
  - 03. 210.8(A)(6) GFCI Protection for Personnel. Dwelling Units. Kitchens
  - 04. 210.8(A)(7) GFCI Protection for Personnel. Dwelling Units. Areas with Sinks
  - 05. 210.8(B). GFCI Protection for Personnel. Other Than Dwelling Units.
  - 06. 210.8(B) GFCI Protection for Personnel. Other Than Dwelling Units. Exceptions.
  - 07. 210.8(D) GFCI Protection for Personnel. Specific Appliances.
  - 08. 210.8(F) GFCI Protection for Personnel. Outdoor Outlets
  - View Additional Activities
    - 09. 210.11(C)(4) Dwelling Units. Garage Branch Circuits.
    - 10. 210.12 Arc-Fault Circuit-Interrupter Protection
    - 11. 210.18. Branch-Circuit Ratings. Rating
    - 12. 210.23 Permissible Loads, Multiple-Outlet Branch Circuits.
    - 13. 210.52(A)(2). General Provisions. Wall Space.
    - 14. 210.52(C)(1). Countertops & Work Surfaces. Wall Spaces.
    - 15. 210.52(C)(2). Countertops & Work Surfaces. Island and Peninsular Countertops and Work Surfaces.
    - 16. 210.52(C)(3) Receptacle Outlet Location.
    - 17. 210.70 Lighting Outlets Required.
    - 18. 210.70(A)(1) Dwelling Units. Habitable Rooms, Kitchens, Laundry Areas, and Bathrooms. Additional Locations
    - 19. 220.41 Dwelling Unit(s). Minimum Unit Load.
    - 20. 220.42 Lighting Load for Non-Dwelling Occupancies.
    - 21. 220.57 Electric Vehicle Supply Equipment (EVSE) Load.
    - 22. 225.41 Emergency Disconnects
    - 23. 225.42. Surge Protection.
    - 24. 230.67. Surge Protection.
    - 25. 230.85 Emergency Disconnects
    - 26. Article 235, Branch Circuits, Feeders, and Services Over 1000 Volts ac, 1500 Volts dc, Nominal.
    - 27. 240.6(A) Standard Ampere Ratings for Fuses and Inverse Time Circuit Breakers
    - 28. 242.9. Indicating
    - 29. 250.64(G) Enclosures with Ventilation Openings.
    - 30. 250.118 Types of Equipment Grounding Conductors.
    - 31. 250.148 Continuity of Equipment Grounding Conductors and Attachment in Boxes.
- Checkpoint 3
- Chapter 3 [9 Activities]
  - 01. Table 300.5(A) Minimum Cover Requirements, 0 to 1000 Volts ac, 1500 Volts dc, Nominal.
  - 02. Article 305, General Requirements for Wiring Methods and Materials for Systems Rated Over 1000 volts ac, 1500 volts dc, Nominal.
  - 03. 312.10 Screws or Other Fasteners.
  - 04. 314.29(B) Underground.
  - 05. 334.40(B) Boxes and Fittings. Devices of Insulating Material.
  - 06. 352.10 Uses Permitted.
  - 07. 352.44 Expansion Fittings.
  - 08. Article 369, Insulated Bus Pipe (IBP)/Tubular Covered Conductors (TCC) Systems.
  - 09. Article 371, Flexible Bus Systems.
- Checkpoint 4
- Chapter 4 [21 Activities]
  - 01. 404.1 Switches. Scope.
  - 02. 404.2(C) Switches Controlling Lighting Loads.
  - 03. 404.14(D) Snap Switch Terminations.
  - 04. 404.16 Reconditioned Equipment
  - 05. 404.30 Switch Enclosures with Doors.
  - 06. 406.3(D) Receptacle Terminations.
  - 07. 406.4(G). Protection of Floor Receptacles.
  - 08. 406.6(D) Receptacle Faceplate (Cover Plates) with Integral Night Light and/or USB Charger.
  - View Additional Activities
    - 09. 406.9(A),(B) Damp Locations, Wet Locations.
    - 10. 406.9(C) Bathtub and Shower Space.
    - 11. 406.12 Tamper-Resistant Receptacles
    - 12. 408.4(B) Source of Supply.
    - 13. 408.43 Panelboard Orientation.
    - 14. 410.10(D) Bathtub and Shower Areas.
    - 15. 410. Part XVII. Special Provisions for Germicidal Irradiation Luminaires.
    - 16. 422.16(B) Specific Appliances.
    - 17.422.18 Ceiling-Suspended (Paddle) Fans.
    - 18. 422.22 Utilizing Separable Attachment Fittings.
    - 19. 430.113 Energy from More than One Source.
    - 20. 440.8. Single Machine and Location
    - 21. 440.11 Disconnecting Means. General.
- Checkpoint 5
- Chapter 5 [27 Activities]
  - 01. 500.1 Hazardous (Classified) Locations, Classes I, II, and III, Divisions 1 and 2. Scope.
  - 02. 500.5(D) Class III Locations.
  - 03. 500.7 Protection Techniques.
  - 04. 500.8(E)(3) Unused Openings.
  - 05. 501.10(A)(2) Class I, Division 1. Flexible Connections
  - 06. 501.30(B) Bonding.
  - 07. 502.30(B)(1), 503.30(B)(1) Bonding.
  - 08. 503.10(A) Class III, Division 1.
  - View Additional Activities
    - 09. 505.8 Protection Techniques.
    - 10. 505.15(C) Zone 2.
    - 11. 505.16(B) Zone 1.
    - 12. Article 512 Cannabis Oil Equipment and Cannabis Oil Systems Using Flammable Materials.
    - 13. 517.6 Patient Care-Related Electrical Equipment.
    - 14. 517.10(B). Not Covered.
    - 15. 517.14 Panelboard Bonding
    - 16. 517.20(A) Receptacles and Fixed Equipment.
    - 17. 517.22 Demand Factors.
    - 18. 517.30 Sources of Power.
    - 19. 518.5 Supply.
    - 20. 547.26 Physical Protection.
    - 21. 550.16(C)(1) Exposed Non-Current-Carrying Metal Parts
    - 22. 550.32. Service Equipment.
    - 23. 550.33(A) Feeder Equipment.
    - 24. 551.40(D). Loss of Ground Device.
    - 25. 555.14 Equipotential Planes and Bonding of Equipotential Planes.
    - 26. 555.15 Replacement of Equipment.
    - 27. 555.36(C) Emergency Electrical Disconnect.
- Checkpoint 6
- Chapter 6 [21 Activities]
  - 01. 620.22 Branch Circuits for Car Lighting, Receptacle(s), Ventilation, Heating and Air-Conditioning.
  - 02. 620.23 Branch Circuits for Machine Room, Control Room/Machinery Space, Control Space, or Truss Interior Lighting and Receptacle(s).
  - 03. 625.40 Electric Vehicle Branch Circuit.
  - 04. 625.42 Rating.
  - 05. 625.102 Installation.
  - 06. 626.1 Electrified Truck Parking Spaces. Scope.
  - 07. 630.8 Ground-Fault Circuit-Interrupter Protection for Personnel
  - 08. 646.19 Entrance to and Egress from Working Space.
  - View Additional Activities
    - 09. 680.5 Ground-Fault Circuit-Interrupter (GFCI) and Special Purpose Ground-Fault Circuit-Interrupter (SPGFCI) Protection
    - 10. 680.12 Equipment Rooms, Vaults, and Pits.
    - 11. 680.21(D) Pool Pump Motor Replacement.
    - 12. 680.22(A) Receptacles.
    - 13. 680.26. Equipotential Bonding.
    - 14. 680.32 Ground-Fault Circuit-Interrupter (GFCI) and Special Purpose Ground-Fault Circuit Interrupter (SPGFCI) Protection Overview
    - 15. 680.43 Indoor Installations.
    - 16. 680.54(B),(C) Bonding, Equipotential Bonding of Splash Pads.
    - 17. 680.58 GFCI, SPGFCI Protection for Adjacent Receptacle Outlets.
    - 18. 680.59 GFCI and SPGFCI Protection for Permanently Installed Nonsubmersible Pumps.
    - 19. 680.83 Equipotential Bonding.
    - 20. 690.12(D) Buildings with Rapid Shutdown.
    - 21. 695.1. Fire Pumps. Scope.
- Checkpoint 7
- Chapter 7 [12 Activities]
  - 01. 700.11 Wiring, Class-2 Powered Emergency Lighting Systems.
  - 02. 701.1. Legally Required Standby Systems. Scope.
  - 03. 701.12(C)(3) Public Gas System, Municipal Water Supply.
  - 04. 701.32 Selective Coordination.
  - 05. 702.7(A) Signs. Standby.
  - 06. 702.12(B). Portable Generators 15kW or Less.
  - 07. 705.10. Identification of Power Sources.
  - 08. 706.7 Commissioning and Maintenance.
  - View Additional Activities
    - 09. Article 726 Class 4 Fault-Managed Power Systems
    - 10. 750.6. Listing
    - 11. 760.24(A) Mechanical Execution of Work.
    - 12. 760.33 Supply-Side Overvoltage Protection.
- Checkpoint 8
- Chapter 8 [10 Activities]
  - 01. 800.3 Other Articles.
  - 02. 800.100(B)(2) Electrode. In Buildings or Structures with Grounding Means.
  - 03. 800.100(B)(3) Electrode. In Buildings or Structures Without an Intersystem Bonding Termination or Grounding Means.
  - 04. 800.113 Installation of Cables Used for Communication Circuits, Communications Wires, Cable Routing Assemblies, and Communications Raceways.
  - 05. 800.179 Wires and Cables.
  - 06. 810.15 Grounding or Bonding.
  - 07. 830.40(B). Low-Power Circuits.
  - 08. 830.47 Underground Network-Powered Broadband Communications Cables Entering Buildings.
  - 09. 830.133(C) Splicing of Medium-Powered Network-Powered Communications Cables.
  - 10. 830.160 Bends.
- Checkpoint 9
- Chapter 9 and Annexes [2 Activities]
  - 01. Chapter 9, Table 1. Percent of Cross Section of Conduit and Tubing for Conductors and Cables.
  - 02. Annex C, Table C.1 Conduit, Tubing, and Cable Tray Fill Tables for Conductors and Fixture Wires of the Same Size.
- Final Checkpoint
Course Completion
- Mandatory Questionnaire
- Certificate of Completion

Instructor Bio

Jerry previously served the state of North Carolina as a Level III electrical inspector and provided state-approved electrical training for electrical inspectors at both Alamance County and Guilford County (NC) Community Colleges. Jerry taught the Kentucky state-approved four-year electrical apprenticeship programs offered by the Independent Electrical Contractors (IEC) Trade School and Associated Builders and Contractors (ABC) Trade School, and served the state of Kentucky as a Master Electrician and Louisville Metro Code Enforcement Officer. Jerry is a Certified Distance Education Instructor (CDEI) and NCCER Core and Electrical Curriculum certified instructor. Jerry currently holds North Carolina and ICC electrical inspector accreditations and is recognized by the state of Washington as an approved electrical administrator.

Course Reviews

4.5

153 Reviews

Add to Cart

NE 2023 NEC Changes

Course Description

Course Outline

Instructor Bio

Course Reviews