City of Troy 2023 NEC Changes Part 2

6 Hour Course

$75.00

Course Description
Course Outline

After completing this continuing education course for New York, the participant will be able to apply the 67 most important changes to the 2023 National Electrical Code in common wiring practice.

Learning Objectives:

Identify the new requirements for grounding and bonding in Chapter 2 of the 2023 NEC.
Identify updates, additions, and changes to Chapter 3 of the 2023 National Electrical Code.
Summarize the general requirements for wiring methods and materials for systems rated over 1000 volts ac, 1500 volts dc covered in Article 305.
Describe changes and additions to the exceptions for cables, raceways, or boxes installed in or under metal-corrugated roof decking found in Chapter 3 of the 2023 NEC.
Outline new requirements for installing screws and other fasteners in cabinets, cutout boxes, and meter socket enclosures found in Chapter 3 of the 2023 NEC.
Identify additions and changes to requirements for outlet boxes, underground boxes, and handhole enclosures found in Chapter 3 of the 2023 NEC.
Outline new requirements for insulated bus pipe and flexible bus systems found in Chapter 3 of the 2023 NEC.
List changes to uses permitted and not permitted for nonmetallic-sheathed cable.
Identify changed requirements for use and installation of rigid polyvinyl chloride conduit (PVC) found in Chapter 3 of the 2023 NEC.
Identify updates, additions, and changes to Chapter 4 of the 2023 National Electrical Code.
Describe the change in scope to Chapter 4 of the 2023 NEC.
Identify changes and additions to requirements for switches found in Chapter 4 of the 2023 NEC.
List new locations requiring tamper-resistant receptacles.
Outline new requirements for receptacles, cord connectors, and attachment plugs found in Chapter 4 of the 2023 NEC.
Describe new requirements for switchboards, switchgear, and panelboards found in Chapter 4 of the 2023 NEC.
Identify changes for luminaires, lampholders, and lamps in Chapter 4 of the 2023 NEC.
Describe changes and additions to appliance requirements found in Chapter 4 of the 2023 NEC.
Identify updates, additions, and changes to Chapter 5 of the 2023 National Electrical Code.
Describe the changes to Class III Division 1 and Division. 2 locations found in Chapter 5 of the 2023 NEC.
Outline new requirements for protection of electrical and electronic equipment in hazardous locations.
Identify changes to threading in explosion-proof or dust ignition-proof equipment.
Describe changes to permission for flexible connections and restricted industrial establishments in Class I, Division 1 and Division 2 locations.
Identify new requirements for bonding cable trays, metal strut, angles, and channels found in Chapter 5 of the 2023 NEC.
Outline new wiring methods for Class III Division 1 locations.
Explain the new requirements for cannabis oil equipment and cannabis oil systems using flammable materials found in Chapter 5 of the 2023 NEC.

Approved By: City of Troy – Office of the City Clerk

Add to Cart (877) 724-6150

2023 NEC Changes Part 2
- Chapter 2 [8 Activities]
  - 01. 250.64(G) Enclosures with Ventilation Openings.
  - 02. 250.68(C) Grounding Electrode Conductor Connections.
  - 03. 250.118 Types of Equipment Grounding Conductors.
  - 04. 250.130 Equipment Grounding Conductor Connections.
  - 05. 250.130(C) Replacement of Nongrounding Receptacle or Snap Switch and Branch Circuit Extensions.
  - 06. 250.140 Frames of Ranges and Clothes Dryers.
  - 07. 250.148 Continuity of Equipment Grounding Conductors and Attachment in Boxes.
  - 08. 250.186 Grounding Service-Supplied Alternating-Current Systems.
- Chapter 3 [15 Activities]
  - 01. 300.4(E) Cables, Raceways, or Boxes Installed in or Under Metal-Corrugated Roof Decking.
  - 02. Table 300.5(A) Minimum Cover Requirements, 0 to 1000 Volts ac, 1500 Volts dc, Nominal.
  - 03. Article 305, General Requirements for Wiring Methods and Materials for Systems Rated Over 1000 volts ac, 1500 volts dc, Nominal.
  - 04. 310.15(B)(2). Rooftop.
  - 05. 312.10 Screws or Other Fasteners.
  - 06. 314.27(E) Weight-Supporting Ceiling Receptacles (WSCR) and Weight-Supporting Attachment Fittings (WSAF).
  - 07. 314.29(B) Underground.
  - 08. 334.10 Uses Permitted.
  - View Additional Activities
    - 09. 334.15(B) Protection from Physical Damage.
    - 10. 334.40(B) Boxes and Fittings. Devices of Insulating Material.
    - 11. 344.28 Reaming and Threading.
    - 12. 352.10 Uses Permitted.
    - 13. 352.44 Expansion Fittings.
    - 14. Article 369, Insulated Bus Pipe (IBP)/Tubular Covered Conductors (TCC) Systems.
    - 15. Article 371, Flexible Bus Systems.
- Chapter 4 [24 Activities]
  - 01. 404.1 Switches. Scope.
  - 02. 404.2(C) Switches Controlling Lighting Loads.
  - 03. 404.14(D) Snap Switch Terminations.
  - 04. 404.16 Reconditioned Equipment
  - 05. 404.30 Switch Enclosures with Doors.
  - 06. 406.3(D) Receptacle Terminations.
  - 07. 406.4(G). Protection of Floor Receptacles.
  - 08. 406.6(D) Receptacle Faceplate (Cover Plates) with Integral Night Light and/or USB Charger.
  - View Additional Activities
    - 09. 406.9(A),(B) Damp Locations, Wet Locations.
    - 10. 406.9(C) Bathtub and Shower Space.
    - 11. 406.12 Tamper-Resistant Receptacles
    - 12. 408.4(B) Source of Supply.
    - 13. 408.38 Enclosure.
    - 14. 408.43 Panelboard Orientation.
    - 15. 410.10(D) Bathtub and Shower Areas.
    - 16. 410. Part XVII. Special Provisions for Germicidal Irradiation Luminaires.
    - 17. 422.16(B) Specific Appliances.
    - 18.422.18 Ceiling-Suspended (Paddle) Fans.
    - 19. 422.22 Utilizing Separable Attachment Fittings.
    - 20. 424.93 Installation.
    - 21. 430.113 Energy from More than One Source.
    - 22. 440.8. Single Machine and Location
    - 23. 440.11 Disconnecting Means. General.
    - 24. 445.19 Emergency Shutdown of Prime Mover.
- Chapter 5 [20 Activities]
  - 01. 500.1 Hazardous (Classified) Locations, Classes I, II, and III, Divisions 1 and 2. Scope.
  - 02. 500.5(D) Class III Locations.
  - 03. 500.7 Protection Techniques.
  - 04. 500.8(E)(3) Unused Openings.
  - 05. 501.10(A)(2) Class I, Division 1. Flexible Connections
  - 06. 501.30(B) Bonding.
  - 07. 502.30(B)(1), 503.30(B)(1) Bonding.
  - 08. 503.10(A) Class III, Division 1.
  - View Additional Activities
    - 09. 505.8 Protection Techniques.
    - 10. 505.15(C) Zone 2.
    - 11. 505.16(B) Zone 1.
    - 12. Article 512 Cannabis Oil Equipment and Cannabis Oil Systems Using Flammable Materials.
    - 13. 517.6 Patient Care-Related Electrical Equipment.
    - 14. 517.10(B). Not Covered.
    - 15. 517.14 Panelboard Bonding
    - 16. 517.20(A) Receptacles and Fixed Equipment.
    - 17. 517.22 Demand Factors.
    - 18. 517.30 Sources of Power.
    - 19. 517.70 Diagnostic Imaging and Treatment Equipment. Applicability.
    - 20. 518.5 Supply.
Course Completion
- Mandatory Questionnaire
- Certificate of Completion

Instructor Bio

Jerry previously served the state of North Carolina as a Level III electrical inspector and provided state-approved electrical training for electrical inspectors at both Alamance County and Guilford County (NC) Community Colleges. Jerry taught the Kentucky state-approved four-year electrical apprenticeship programs offered by the Independent Electrical Contractors (IEC) Trade School and Associated Builders and Contractors (ABC) Trade School, and served the state of Kentucky as a Master Electrician and Louisville Metro Code Enforcement Officer. Jerry is a Certified Distance Education Instructor (CDEI) and NCCER Core and Electrical Curriculum certified instructor. Jerry currently holds North Carolina and ICC electrical inspector accreditations and is recognized by the state of Washington as an approved electrical administrator.

Add to Cart

City of Troy 2023 NEC Changes Part 2

Course Description

Course Outline

Instructor Bio