WA 24 Hour Complete NEC Package

24 Hour Course
4.4 62 Reviews
$169.00

Course Description
Course Outline

This package covers all 24-hours required for Washington electricians. All courses are approved by the Washington Department of Labor and Industries:

2023 NEC Changes Part 1
2023 NEC Changes Part 2
RCW/WAC Update
Installation Checklists (2023 NEC)

2023 NEC Changes Part 1

This online course approved for Washington electricians reviews the first 100 of the most important changes to the 2023 National Electrical Code. Changes from Section 100 through Section 406 will be covered.

2023 NEC Changes Part 2

This online course is approved for Washington electricians and reviews the last 100 of the most important changes to the 2023 National Electrical Code. Changes from Section 406 through Annex K will be covered.

RCW/WAC Update

This course provides 4 hours of approved continuing education on the Washington amendments and Washington State Rules & Laws related to the adoption of the 2023 National Electrical Code (NEC).

Installation Checklists (2023 NEC)

This course covers updated installation methods that Washington electricians must learn to pass electrical inspections. Course topics include:

2023 NEC installation methods for wiring underground, rooftop, and more
Checklists for rough and final electrical inspections - both commercial and residential
Checklists for installing and grounding transformers, panelboards, and services

Approved By: Washington Department of Labor & Industries

Add to Cart (877) 724-6150

RCW/WAC Update
- RCW/WAC Update [29 Activities]
  - 01. Introduction to Washington 2023 NEC Rule and Law Continuing Education Update Class for Electricians
  - 02. Sections 19.28.006 and 19.28.010 of the RCW
  - 03. RCW 19.28.010: Electrical Wiring Requirements General Exceptions
  - 04. Sections 19.28.061 - 19.28.091 of the RCW
  - 05. Section 19.28.101 of the RCW
  - 06. Section 19.28.121 - 19.28.161 of the RCW
  - 07. RCW 19.28.161: Certification Apprentices and Trainees Supervision Ratio of Noncertified and Certified Workers Trainee Hours Verification
  - 08. Section 19.28.191 of the RCW
  - View Additional Activities
    - 09. Sections 19.28.195 - 19.28.211 of the RCW
    - 10. RCW 19.28.195: Examination Exception for Equivalent Training and Experience
    - 11. RCW 19.28.201: Examination Times Certification of Results Contents Fees
    - 12. RCW 19.28.205: In-Class Education Requirements
    - 13. RCW 19.28.211: Certificate of Competency Issuance Renewal Continuing Education Fees Effect
    - 14. Sections 19.28.231 and 19.28.241 of the RCW
    - 15. Section 19.28.261 of the RCW
    - 16. Sections 19.28.271 - 19.28.331 of the RCW
    - 17. Section 296-46B-100 of the WAC
    - 18. Sections 296-46B-010 and 296-46B-110 of the WAC
    - 19. Sections 296-46B-210 and 296-46B-215 of the WAC
    - 20. Sections 296-46B-225 and 296-46B-230 of the WAC
    - 21. Sections 296-46B-250 - 296-46B-358 of the WAC
    - 22. Sections 296-46B-410 - 296-46B-450 of the WAC
    - 23. Sections 296-46B-900 and 296-46B-901 of the WAC
    - 24. WAC 296-46B-901: General Electrical Work Permits and Fees
    - 25. Sections 296-46B-908 - 296-46B-915 of the WAC
    - 26. WAC 296-46B-915: Civil Penalty Schedule
    - 27. Section 296-46B-920 of the WAC
    - 28. Sections 296-46B-930 - 296-46B-940 of the WAC
    - 29. WAC 296-46B-940: Electrician / Certificate of Competency Required
Installation Checklists (2023 NEC)
- Installation Checklists (2023 NEC) [50 Activities]
  - 01. Underground - 300.5(F) Backfill
  - 02. Underground - 300.5(H) Bushings
  - 03. Underground - 300.5(J) Earth Movement
  - 04. Underground - Table 300.5(A) Minimum Cover Distance
  - 05. Underground - 300.5(G) Raceway Seals
  - 06. Underground - 314.27(B) Floor Boxes
  - 07. Underground - 250.52(A)(3) Concrete-Encased Electrode
  - 08. Rough Inspection - Rough Inspection Basics
  - View Additional Activities
    - 09. Rough Inspection - 517.13(A) Branch Circuits Serving Patient Care Areas
    - 10. Rough Inspection - 110.12(A) Unused Openings
    - 11. Rough Inspection - 330.30 MC Cable; Securing and Supporting
    - 12. Rough Inspection - 342.14, 344.14, and 358.14 Dissimilar Metals
    - 13. Rough Inspection - Article 100 Definitions: Accessible
    - 14. Rough Inspection - 300.4(A)(1) Cables and Raceways Through Wood Members; Bored Holes
    - 15. Above the Ceiling - 300.11(A)&(B) Secured In Place
    - 16. Above the Ceiling - 200.4(B) Multiple Circuits
    - 17. Above the Ceiling - 424.66/110.26(A)(4) Duct Heaters with Limited Access Above Ceiling/Working Space; Limited Access
    - 18. Above the Ceiling - 410.110(A) Special Provisions for Flush and Recessed Luminaires; Clearance from Combustible Material
    - 19. Above the Ceiling - 590.3(D) Removal of Temporary Wiring
    - 20. Above the Ceiling - 300.22(C) Other Spaces Used for Environmental Air
    - 21. Above the Ceiling - 250.104(A)(B)(C) Bonding of Piping and Exposed Structural Steel
    - 22. Above the Ceiling - 410.117(C) Luminaires; Tap Conductors
    - 23. Above the Ceiling - 300.21 Spread of Fire or Products of Combustion
    - 24. Rooftop - 250.110 Equipment Fastened in Place or Connected by Permanent Wiring Methods
    - 25. Rooftop - 250.12 Clean Surfaces
    - 26. Rooftop - 110.22(A) Identification of Disconnecting Means
    - 27. Rooftop - 250.97 Bonding for Over 250 Volts
    - 28. Rooftop - 440.4(B) Marking on HVAC Equipment
    - 29. Rooftop - 314.23(E)&(F) Raceway Supported Enclosures
    - 30. Rooftop - 210.63(A) Heating, Air-Conditioning, and Refrigeration Equipment Outlet
    - 31. Service, Panelboards, Transformers - 110.24 Available Fault Current
    - 32. Service, Panelboards, Transformers - 200.6 Identification of Grounded Conductors
    - 33. Service, Panelboards, Transformers - 250.119 Identification of Equipment Grounding Conductors
    - 34. Service, Panelboards, Transformers - 210.5(C)(1) & 235.5(C)(1) Identification of Ungrounded Conductors
    - 35. Service, Panelboards, Transformers - 110.26(A)(1) Working Space
    - 36. Service, Panelboards, Transformers - 408.5 Clearance for Conductor Entering Bus Enclosures
    - 37. Service, Panelboards, Transformers - 250.30(A)(1) System Bonding Jumpers
    - 38. Service, Panelboards, Transformers - 250.30(A)(4&5) Grounding Electrode and Grounding Electrode Conductor, Single Separately Derived System
    - 39. Final Inspection - 450.10(A) Grounding of Dry-Type Transformer Enclosures
    - 40. Final Inspection - 700.12 General Requirements
    - 41. Final Inspection - 700.16 Emergency Illumination, Part 1
    - 42. Final Inspection - 700.16 Emergency Illumination, Part 2
    - 43. Final Inspection - 110.3(B) Installation and Use
    - 44. Final Inspection - 427.22 Pipelines and Vessels; Ground-Fault Protection of Equipment
    - 45. Final Inspection - Final Equipment Installation
    - 46. Final Inspection - 700.12(H)(2)(3) Battery-Equipped Emergency Luminaires
    - 47. Final Inspection - 700.11 Identification of Emergency Lighting Circuits
    - 48. Final Inspection - 210.8 GFCI Protection for Personnel
    - 49. Final Inspection - 110.25 Lockable Disconnecting Means
    - 50. Final Inspection - 408.4(A) Circuit Directory
2023 NEC Changes Part 1
- Chapter 1 [22 Activities]
  - 01. 100. Definitions. Scope.
  - 02. 100 Definitions. Attachment Fitting, Weight-Supporting (WSAF). & Receptacle, Weight-Supporting Ceiling (WSCR).
  - 03. 100 Definitions. Class 4 Circuit, Class 4 Device, Class 4 Power System, Class 4 Receiver, Class 4 Transmitter, Class 4 Utilization Equipment.
  - 04. 100 Definitions. Cord Connector.
  - 05. 100 Definitions. Counter (Countertop)
  - 06. 100 Definitions. Ground Fault Circuit Interrupter, Special Purpose.
  - 07. 100. Definitions.?Ground-Fault Detector-Interrupter, dc (GFDI)?
  - 08. 100 Grounding Conductor, Impedance.
  - View Additional Activities
    - 09. 100 Definitions. Grounded System, Impedance.
    - 10. 100 Definitions. Panelboard, Enclosed. (Enclosed Panelboard)
    - 11. 100 Definitions. Restricted Industrial Establishment.
    - 12. 100 Definitions. Stored-Energy Power Supply System (SEPSS).
    - 13. 100 Definitions. Work Surface.
    - 14. 110.3(A)(8). Examination. Cybersecurity.
    - 15. 110.3(B) 110.3(B) Installation and Use.
    - 16. 110.16(B) Service Equipment and Feeder Supplied Equipment.
    - 17. 110.17. Servicing and Maintenance of Equipment.
    - 18. 110.20 Reconditioned Equipment.
    - 19. 110.26 Spaces About Electrical Equipment.
    - 20. 110.26(A)(6) Grade, Floor, or Working Platform.
    - 21. 110.29 In Sight From (Within Sight From, Within Sight)
    - 22. 110.33(A) Entrance to Enclosures and Access to Working Space. Entrance.
- Chapter 2 [53 Activities]
  - 01. Article 210, Branch Circuits Not Over 1000 Volts ac, 1500 Volts dc, Nominal.
  - 02. 210.2 Reconditioned Equipment
  - 03. 210.5(C)(1) Branch Circuits Supplied from More than One Nominal Voltage System.
  - 04. 210.8(A)(5) GFCI Protection for Personnel. Dwelling Units. Basements
  - 05. 210.8(A)(6) GFCI Protection for Personnel. Dwelling Units. Kitchens
  - 06. 210.8(A)(7) GFCI Protection for Personnel. Dwelling Units. Areas with Sinks
  - 07. 210.8(B). GFCI Protection for Personnel. Other Than Dwelling Units.
  - 08. 210.8(B) GFCI Protection for Personnel. Other Than Dwelling Units. Exceptions.
  - View Additional Activities
    - 09. 210.8(D) GFCI Protection for Personnel. Specific Appliances.
    - 10. 210.8(F) GFCI Protection for Personnel. Outdoor Outlets
    - 11. 210.11(C)(4) Dwelling Units. Garage Branch Circuits.
    - 12. 210.12 Arc-Fault Circuit-Interrupter Protection
    - 13. 210.17 Guest Rooms and Guest Suites.
    - 14. 210.18. Branch-Circuit Ratings. Rating
    - 15. 210.23 Permissible Loads, Multiple-Outlet Branch Circuits.
    - 16. Table 210.24(1) Summary of Branch-Circuit Requirements - Copper Conductors.
    - 17. 210.52(A)(2). General Provisions. Wall Space.
    - 18. 210.52(C)(1). Countertops & Work Surfaces. Wall Spaces.
    - 19. 210.52(C)(2). Countertops & Work Surfaces. Island and Peninsular Countertops and Work Surfaces.
    - 20. 210.52(C)(3) Receptacle Outlet Location.
    - 21. 210.52(D) Bathrooms
    - 22. 210.70 Lighting Outlets Required.
    - 23. 210.70(A)(1) Dwelling Units. Habitable Rooms, Kitchens, Laundry Areas, and Bathrooms. Additional Locations
    - 24. 215.15 Barriers.
    - 25. 215.18 Surge Protection.
    - 26. 220.41 Dwelling Unit(s). Minimum Unit Load.
    - 27. 220.42 Lighting Load for Non-Dwelling Occupancies.
    - 28. 220.57 Electric Vehicle Supply Equipment (EVSE) Load.
    - 29. 220.110 Health Care Facilities. Receptacle Loads.
    - 30. 220.120 Marinas. Receptacle Loads.
    - 31. Article 225, Outside Branch Circuits and Feeders.
    - 32. 225.41 Emergency Disconnects
    - 33. 225.42. Surge Protection.
    - 34. 230.7 Other Conductors.
    - 35. 230.24(A) Clearances. Above Roofs.
    - 36. 230.30(B) Wiring Methods.
    - 37. 230.62(C) Barriers.
    - 38. 230.67. Surge Protection.
    - 39. 230.71(B) Two to Six Service Disconnecting Means.
    - 40. 230.85 Emergency Disconnects
    - 41. Article 235, Branch Circuits, Feeders, and Services Over 1000 Volts ac, 1500 Volts dc, Nominal.
    - 42. 240.4(B) Overcurrent Devices Rated 800?Amperes or Less
    - 43. 240.6(A) Standard Ampere Ratings for Fuses and Inverse Time Circuit Breakers
    - 44. 242.9. Indicating
    - 45. Article 245, Overcurrent Protection for Systems Rated Over 1000 Volts ac, 1500 volts dc.
    - 46. 250.64(G) Enclosures with Ventilation Openings.
    - 47. 250.68(C) Grounding Electrode Conductor Connections.
    - 48. 250.118 Types of Equipment Grounding Conductors.
    - 49. 250.130 Equipment Grounding Conductor Connections.
    - 50. 250.130(C) Replacement of Nongrounding Receptacle or Snap Switch and Branch Circuit Extensions.
    - 51. 250.140 Frames of Ranges and Clothes Dryers.
    - 52. 250.148 Continuity of Equipment Grounding Conductors and Attachment in Boxes.
    - 53. 250.186 Grounding Service-Supplied Alternating-Current Systems.
- Chapter 3 [15 Activities]
  - 01. 300.4(E) Cables, Raceways, or Boxes Installed in or Under Metal-Corrugated Roof Decking.
  - 02. Table 300.5(A) Minimum Cover Requirements, 0 to 1000 Volts ac, 1500 Volts dc, Nominal.
  - 03. Article 305, General Requirements for Wiring Methods and Materials for Systems Rated Over 1000 volts ac, 1500 volts dc, Nominal.
  - 04. 310.15(B)(2). Rooftop.
  - 05. 312.10 Screws or Other Fasteners.
  - 06. 314.27(E) Weight-Supporting Ceiling Receptacles (WSCR) and Weight-Supporting Attachment Fittings (WSAF).
  - 07. 314.29(B) Underground.
  - 08. 334.10 Uses Permitted.
  - View Additional Activities
    - 09. 334.15(B) Protection from Physical Damage.
    - 10. 334.40(B) Boxes and Fittings. Devices of Insulating Material.
    - 11. 344.28 Reaming and Threading.
    - 12. 352.10 Uses Permitted.
    - 13. 352.44 Expansion Fittings.
    - 14. Article 369, Insulated Bus Pipe (IBP)/Tubular Covered Conductors (TCC) Systems.
    - 15. Article 371, Flexible Bus Systems.
- Chapter 4, Part 1 [10 Activities]
  - 01. 404.1 Switches. Scope.
  - 02. 404.2(C) Switches Controlling Lighting Loads.
  - 03. 404.14(D) Snap Switch Terminations.
  - 04. 404.16 Reconditioned Equipment
  - 05. 404.30 Switch Enclosures with Doors.
  - 06. 406.3(D) Receptacle Terminations.
  - 07. 406.4(G). Protection of Floor Receptacles.
  - 08. 406.6(D) Receptacle Faceplate (Cover Plates) with Integral Night Light and/or USB Charger.
  - 09. 406.9(A),(B) Damp Locations, Wet Locations.
  - 10. 406.9(C) Bathtub and Shower Space.
2023 NEC Changes Part 2
- Chapter 4, Part 2 [14 Activities]
  - 01. 406.12 Tamper-Resistant Receptacles
  - 02. 408.4(B) Source of Supply.
  - 03. 408.38 Enclosure.
  - 04. 408.43 Panelboard Orientation.
  - 05. 410.10(D) Bathtub and Shower Areas.
  - 06. 410. Part XVII. Special Provisions for Germicidal Irradiation Luminaires.
  - 07. 422.16(B) Specific Appliances.
  - 08.422.18 Ceiling-Suspended (Paddle) Fans.
  - View Additional Activities
    - 09. 422.22 Utilizing Separable Attachment Fittings.
    - 10. 424.93 Installation.
    - 11. 430.113 Energy from More than One Source.
    - 12. 440.8. Single Machine and Location
    - 13. 440.11 Disconnecting Means. General.
    - 14. 445.19 Emergency Shutdown of Prime Mover.
- Chapter 5 [29 Activities]
  - 01. 500.1 Hazardous (Classified) Locations, Classes I, II, and III, Divisions 1 and 2. Scope.
  - 02. 500.5(D) Class III Locations.
  - 03. 500.7 Protection Techniques.
  - 04. 500.8(E)(3) Unused Openings.
  - 05. 501.10(A)(2) Class I, Division 1. Flexible Connections
  - 06. 501.30(B) Bonding.
  - 07. 502.30(B)(1), 503.30(B)(1) Bonding.
  - 08. 503.10(A) Class III, Division 1.
  - View Additional Activities
    - 09. 505.8 Protection Techniques.
    - 10. 505.15(C) Zone 2.
    - 11. 505.16(B) Zone 1.
    - 12. Article 512 Cannabis Oil Equipment and Cannabis Oil Systems Using Flammable Materials.
    - 13. 517.6 Patient Care-Related Electrical Equipment.
    - 14. 517.10(B). Not Covered.
    - 15. 517.14 Panelboard Bonding
    - 16. 517.20(A) Receptacles and Fixed Equipment.
    - 17. 517.22 Demand Factors.
    - 18. 517.30 Sources of Power.
    - 19. 517.70 Diagnostic Imaging and Treatment Equipment. Applicability.
    - 20. 518.5 Supply.
    - 21. 547.26 Physical Protection.
    - 22. 547.44 Equipotential Planes and Bonding of Equipotential Planes.
    - 23. 550.16(C)(1) Exposed Non-Current-Carrying Metal Parts
    - 24. 550.32. Service Equipment.
    - 25. 550.33(A) Feeder Equipment.
    - 26. 551.40(D). Loss of Ground Device.
    - 27. 555.14 Equipotential Planes and Bonding of Equipotential Planes.
    - 28. 555.15 Replacement of Equipment.
    - 29. 555.36(C) Emergency Electrical Disconnect.
- Chapter 6 [25 Activities]
  - 01. 620.22 Branch Circuits for Car Lighting, Receptacle(s), Ventilation, Heating and Air-Conditioning.
  - 02. 620.23 Branch Circuits for Machine Room, Control Room/Machinery Space, Control Space, or Truss Interior Lighting and Receptacle(s).
  - 03. 625.40 Electric Vehicle Branch Circuit.
  - 04. 625.42 Rating.
  - 05. 625.43 Disconnecting Means.
  - 06. 625.49 Island Mode.
  - 07. 625.102 Installation.
  - 08. 626.1 Electrified Truck Parking Spaces. Scope.
  - View Additional Activities
    - 09. 630.8 Ground-Fault Circuit-Interrupter Protection for Personnel
    - 10. 646.19 Entrance to and Egress from Working Space.
    - 11. 680.5 Ground-Fault Circuit-Interrupter (GFCI) and Special Purpose Ground-Fault Circuit-Interrupter (SPGFCI) Protection
    - 12. 680.12 Equipment Rooms, Vaults, and Pits.
    - 13. 680.21(D) Pool Pump Motor Replacement.
    - 14. 680.22(A) Receptacles.
    - 15. 680.26. Equipotential Bonding.
    - 16. 680.32 Ground-Fault Circuit-Interrupter (GFCI) and Special Purpose Ground-Fault Circuit Interrupter (SPGFCI) Protection Overview
    - 17. 680.43 Indoor Installations.
    - 18. 680.54(B),(C) Bonding, Equipotential Bonding of Splash Pads.
    - 19. 680.58 GFCI, SPGFCI Protection for Adjacent Receptacle Outlets.
    - 20. 680.59 GFCI and SPGFCI Protection for Permanently Installed Nonsubmersible Pumps.
    - 21. 680.83 Equipotential Bonding.
    - 22. 690.4(G) PV Equipment Floating on Bodies of Water.
    - 23. 690.12(D) Buildings with Rapid Shutdown.
    - 24. 694.7 Construction and Maintenance.
    - 25. 695.1. Fire Pumps. Scope.
- Chapter 7 [19 Activities]
  - 01. 700.3 Tests and Maintenance.
  - 02. 700.4(B) Selective Load Management.
  - 03. 700.11 Wiring, Class-2 Powered Emergency Lighting Systems.
  - 04. 700.12(C) Supply Duration.
  - 05. 700.12(E) Stored-Energy Power Supply Systems (SEPSS).
  - 06. 701.1. Legally Required Standby Systems. Scope.
  - 07. 701.12(C)(3) Public Gas System, Municipal Water Supply.
  - 08. 701.32 Selective Coordination.
  - View Additional Activities
    - 09. 702.7(A) Signs. Standby.
    - 10. 702.12(B). Portable Generators 15kW or Less.
    - 11. 705.10. Identification of Power Sources.
    - 12. 706.7 Commissioning and Maintenance.
    - 13. Article 724 Class 1 Power-Limited Circuits and Class 1 Power-Limited Remote-Control and Signaling Circuits.
    - 14. Article 725, Class 2 and Class 3 Power-Limited Circuits.
    - 15. 725.3(A) Spread of Fire or Products of Combustion.
    - 16. Article 726 Class 4 Fault-Managed Power Systems
    - 17. 750.6. Listing
    - 18. 760.24(A) Mechanical Execution of Work.
    - 19. 760.33 Supply-Side Overvoltage Protection.
- Chapter 8 [10 Activities]
  - 01. 800.3 Other Articles.
  - 02. 800.100(B)(2) Electrode. In Buildings or Structures with Grounding Means.
  - 03. 800.100(B)(3) Electrode. In Buildings or Structures Without an Intersystem Bonding Termination or Grounding Means.
  - 04. 800.113 Installation of Cables Used for Communication Circuits, Communications Wires, Cable Routing Assemblies, and Communications Raceways.
  - 05. 800.179 Wires and Cables.
  - 06. 810.15 Grounding or Bonding.
  - 07. 830.40(B). Low-Power Circuits.
  - 08. 830.47 Underground Network-Powered Broadband Communications Cables Entering Buildings.
  - 09. 830.133(C) Splicing of Medium-Powered Network-Powered Communications Cables.
  - 10. 830.160 Bends.
- Chapter 9 and Annexes [3 Activities]
  - 01. Chapter 9, Table 1. Percent of Cross Section of Conduit and Tubing for Conductors and Cables.
  - 02. Annex C, Table C.1 Conduit, Tubing, and Cable Tray Fill Tables for Conductors and Fixture Wires of the Same Size.
  - 03. Annex K, Use of Medical Electrical Equipment in Dwellings and Residential Board-and-Care Occupancies.
Course Completion
- Mandatory Questionnaire
- RCW/WAC Update - Certificate of Completion (1 of 4)
- Installation Checklists (2023 NEC) - Certificate of Completion (2 of 4)
- 2023 NEC Changes Part 1 - Certificate of Completion (3 of 4)
- 2023 NEC Changes Part 2 - Certificate of Completion (4 of 4)
- Expedited Reporting Available for $19

Instructor Bio

Jerry previously served the state of North Carolina as a Level III electrical inspector and provided state-approved electrical training for electrical inspectors at both Alamance County and Guilford County (NC) Community Colleges. Jerry taught the Kentucky state-approved four-year electrical apprenticeship programs offered by the Independent Electrical Contractors (IEC) Trade School and Associated Builders and Contractors (ABC) Trade School, and served the state of Kentucky as a Master Electrician and Louisville Metro Code Enforcement Officer. Jerry is a Certified Distance Education Instructor (CDEI) and NCCER Core and Electrical Curriculum certified instructor. Jerry currently holds North Carolina and ICC electrical inspector accreditations and is recognized by the state of Washington as an approved electrical administrator.

Course Reviews

4.4

62 Reviews

Add to Cart

WA 24 Hour Complete NEC Package

Course Description

Course Outline

Instructor Bio

Course Reviews